Home > Testing and Certification > Electromagnetic compatibility (EMC)/ interference (EMI)

EMC

Laboratory

Description:

EMC laboratories EVPÚ a.s. belong to the top workplaces for EMC measurement in Europe, in particular the Semianechoid chamber of dimensions (L x W x H): 20.5 m x 12.4 m x 7.80 m equipped with top measuring equipment and trained personnel with long-term experience.

we provide equipment tests to meet the requirements of Directive 2014/30/EU of the European Parliament and of the Council on the harmonization of legislation of member states relating to electromagnetic compatibility (EMC)
we provide advice and technical cooperation in the testing and development of components and technical units

Measurements:

measurement of the magnetic and electric component of the electromagnetic field;
measurement of the level of interfering clamp voltage;
measurement of radiated power;
measurement of the level of the electric component of the electromagnetic field;
measurement of the level of the magnetic component of the electromagnetic field;
measurement of low-frequency currents;
measurement of voltage amplitude changes in the distribution network;

Resilience detection:

detection of resistance to electrostatic discharge
detection of immunity to interfering electromagnetic fields;
detection of resistance to electrical impulse bursts (burst test);
testing for resistance to voltage surges;
detection of resistance to induced High frequency currents;
detection of resistance to magnetic fields (nf, pulsed, damped oscillating);
detection of resistance to oscillatory waves, harmonic and interharmonic. voltage in the distribution network;

Technical equipment:

Measurements and tests shall be carried out:

Semianechoic chamber, with dimensions (L x W x H): 20.5 m x 12.4 m x 7.80 m;
Anechoic chamber, with dimensions (L x W x H): 7,30 m x 3,40 m x 3,60 m;

Main instrumentation:

Rohde & Schwarz ESW 26, receiver 1Hz – 26,5 GHz;
Rohde & Schwarz SAM 100, amplifier 2GHz – 20GHz, 20W;
Antenna SA-570, 200 MHz – 1 GHz, „Double ridge horn “, aperture 69,0 cm x 94,5 cm;
Antenna SA-571, 1 GHz – 18 GHz, „Double ridge horn “, aperture 24,2 cm x 13,6 cm;
Antenna ROD RA-01 HV 9kHz -30MHz;
Antenna Biconical HUF-Z2 20MHz- 200 MHz;

Test parameters:

Emission tests: frequency range: 9 kHz – 26 GHz
Emission tests under voltage: Frequency range: 9 kHz – 30 MHz
RF electromagnetic field resistance tests: Frequency range: 26 MHz – 18 GHz
Electrostatic discharge resistance test: Air: up to 15 kV; Contact: up to 8 kV
Test for resistance to interference induced by high-frequency fields, propagated by power lines: Frequency range: 150 kHz – 230 MHz
Shock impulse resistance test: up to 4 kV
Test for resistance to fast electrical transients/pulse groups: up to 4 kV